Accessori

---

The equipment may be fitted with a bearing centre plate, interposed between the upper frame (with the winch), and the one below (with the translation wheels).

The bearing centre plate can be have a maximum rotation of 350 degrees and give the following operating advantages to the equipment.

The scaffolding can be brought to the inside of the facade and leant on the side of the crane or on the rails. it will facilitate the traversing of the equipment along narrow tracks or with technical volumes in which movement is difficult. it will allow to operate on parallel sides without moving.

T/94 and equipment can be endowed with a lifting winch for materials, (EW) electric or manual (MW), which, thanks to a special frame, enables to lift glasses of the facade, either for installation or for replacement of them in case of breakage because of natural settling of the facade.

Also this accessory shows that the planning of our equipment is specifically directed towards the solution of global problems concerning buildings with glazed facades and that a shrwd purchase policy of Customers, adding a minimum expense, enables a real saving on administration costs of the building.

Our anchor system to the wall consist of an especially shaped frame, Teflon made, anchored to the gondola with articulated arms.

The Teflon frame slides inside the planned guides allowing the gondola to remain at a constant distance from the wall and to be fully unaffected by the lateral wind guaste.